Textile Automation Products

FIBRESCAN CRYSTAL

Fibrescan is a simple and reliable system for removal of foreign fibre and white PP contaminants in cotton Blowroom lines.

Fibrescan B & W is a Multi Camera Sensor based technology working on the principle of monochromatic light intensity variation.Multiple miniature camera sensors interlaced with advanced DIPT (Digital Image Processing Technology), PMAC (Pixel Mapping Across Camera Sensors) and PABE (Pilot Air Boosted Ejector) are at the core of Fibrescan. DIPT, PMAC and PABE together enhance the effectiveness of the equipment and provide the best efficiency among this technology machines.

Features

  • Multi Camera Sensor one for every 65mm of duct width.
  • DIPT – Digital image Processing Technology for optimum detection of Contaminants
  • PMAC – Pixel Mapping Across Camera Sensors
  • Very low clean cotton ejections typically 0.5% for 40 Ejections / Minute.
  • Hybrid Embedded Controller enhancesreliability.
  • Easy to Clean and Maintain, No PC Needed.
Fibrescan crystal have multi camera Sensor one for every 65mm of duct width

Fibrescan B & W with U-Sonic (GA Drawing)

Technical Specifications

DescriptionFibreScan Crystal
Sensing TechnologyMultiple Tech with Daylight Camera Array Sensing & UV Spectral Imaging
ProcessingEmbedded Controller with
DIPT  –  Digital Image Processing Technology
PMAC –  Pixel Mapping Across Camera Sensor Array
PABE  –  Pilot Air Booster Ejector
Type and No of CamerasMultiple Camera Array Sensors – 64 Nos MonoChrome
Daylight Camera Array Sensor
UV Spectral Imaging Camera Array Sensor
Resolution2048 * 1 with  128 Pixels for  Each Camera     
Camera Scanning Speed (LPS)upto 12000 LPS for Camera Sensor Array
White PP DetectionUV Spectral Imaging
Ejection SolenoidUltra Quick PABE Ejector with sub 7Ms Response for both ON – OFF
Production Capacity800 Kgs/Hour-1000 kgs
Throughput Duct size1040 * 100 mm
Size of Machine2670 x 1350 x
1000 mm 
No of Ejection Valve26 Nos
Ejection Waste %Below 0.5% – 1% Maximum 50 Ejections / Min
Sensitivity SettingOn Area, Vertical and Horizontal Sizes & size wise color selection Settings
DiagnosticsCamera Sensor, Ejection Valve & Lighting Hours,Intensity  and Performance graphs
Display FeaturesComprehensive for both Camera Array Sensor & UV Camera Array Sensor
Tube Light Nos and Wattage6 Nos ( 3* 2 – 54 watts ) Day light & 12 Nos (6*2 – 36 watts ) UV light
Control SystemDedicated  Embedded Controller for Camera Array Sensor , UV Spectral Img
Operator InterfaceHMI on Mc
Power Consumption2 Kw + Fan
Power415 Volts 3 Phase 50 Hz 
Ejected Material CollectionEMCH – Ejected Material Collection Hanger – Optional
Booster Fan for Ejected MaterialBooster Fan based on Feed Mc Specs  
Ejected Cotton Grams / Ejection0.5 Grams / Ejection after Fine Cleaner
0.9 Grams / Ejection after Coarse Cleaner
Compressed Air Requirements3 – 4 CFM based on 40 Ejections / Min @ 6.5 Bar
Fibrescan is a simple and reliable system for removal of foreign fibre and white PP contaminants
UA-146199857-2