FIBRESCAN ZIRCON TANDEM

Fibrescan is a simple and reliable system for removal of Color PP & white PP contaminants in cotton Blowroom lines. Hybrid Intelligent TriLinear RGB Cameras and Multiple miniature camera array sensors interlaced with advanced technology are at the core of FibreScan.

  • DIPT (Digital Image Processing Technology)                         – Daylight for color scaning
  • PMAC (Pixel Mapping Across Camera Sensors)                      – UV camera Array for Spectral Imaging
DIPT, PMAC in combination enhance the effectiveness of the equipment and provide the best efficiency among this technology machines in the world.

Features

  • Hybrid Intelligent TriLinear RGB Cameras for every 240 mm of duct width.
  • Multi-Camera Sensor one for every 60mm of duct width.
  • DIPT – Digital Image Processing Technology for optimum detection
    of Contaminants.
  • Very low clean cotton ejections typically 0.5% for 30 Ejections/Min.
  • Hybrid Embedded Controller enhances reliability.
  • Easy to clean and Maintain, No PC Needed.
  • Higher efficiency than other technology machin

Technical Specifications 

Description FibreScan Zircon – CL & UV (Tandem)
Sensing Technology
Quad Tech with TriLinear RGB Line Scan Camera and Multiple Camera
Sensor Array
Processing Based Real – Time Image Processing Technology
DIPT – Digital Image Processing Technology
PMAC – Pixel Mapping Across Camera Sensor Array
Type and No of Cameras Multiple Camera Array Sensors – 32 Nos
TriLinear RGB Line Scan Camera 8 Nos
Resolution 8192 Pixels (4*2048) for each TriLinear RGB camera
2048 Pixels (16*128 ) for each Camera Arrays
Camera scanning speed (LPS) Upto 12000 LPS for Cameras
Production Capacity Upto 1000 Kgs /Hour
Throughput Duct size 960*100mm
Size of Machine 1250 x 1350 mm Height will vary depends upon the
blowroom layout
No of Ejection Value 48 Nos
Ejection Waste % Below 0.5 % – 1.0 % Maximum 60 Ejection / Min
Sensitivity setting On Area, Vertical, Horizontal Sizes Wise Settings
Diagnostics Camera Sensor, Ejection Valve, Lighting Hours, Intensity graphs
Display Feature Comprehensive for Camera Array Sensor & RGB Camera
Tube Light Nos and Wattage 8 Nos (4*2 – 36 Watts) UV light, 4 Nos(2*2 – 54 Watts) Daylight
Control System Dedicated Embedded controller for daylight camera array sensing &
UV Spectral Image
Operator Interface HMI and Console on Mc
Power consumption 2 Kw + Fan
Power 415 Volts 3 Phase 50 Hz
Ejected material Collection AEMCH – Applied Ejected Material Collection Hanger – Optional
Ejected Cotton Grams/ Ejection 0.5 Grams / Ejection after Fine Cleaner
0.9 Grams / Ejection after coarse Cleaner
Compressed Air Requirements 3 CFM based on 50 Ejection/Min @ 6.5 Bar
   
   
   
UA-146199857-2