FIBRESCAN SAPPHIRE COLOUR
Fibrescan is a simple and reliable system for removal of colour PP contaminants in cotton Blowroom lines. Multiple miniature camera array sensors interlaced with advanced technology are at the core of FibreScan.
- DIPT (Digital Image Processing Technology)
- PMAC (Pixel Mapping Across Camera sensors )
DIPT, PMAC in combination enhance the effectiveness
of the equipment and provide the best efficiency among this
technology machines in the world.
Features
- Multi-Camera sensors one for every 65 mm of duct width.
- DIPT – Digital Image Processing Technology for optimum detection of contaminants
- Very low clean cotton ejections typically 0.3% for 30 ejections / min
- Hybrid Embedded controller enhances reliability
- Easy to clean and maintain, No PC Needed
Technical Specifications
| Description | FibreScan Sapphire | |||
| Sensing Technology |
| |||
| Processing | Embedded Controller with DIPT – Digital Image Processing Technology PMAC – Pixel Mapping Across Camera Sensor Array | |||
| Type and No of Cameras | Multiple Camera Array Sensors – 32 Nos MonoChrome Daylight Camera Array Sensor | |||
| Resolution | 2048 * 1 with 128 Pixels for Each Camera | |||
| Camera Scanning Speed (LPS) | upto 12000 LPS for Camera Sensor Array | |||
| Production Capacity | 800 Kgs /Hour | |||
| Throughput Duct size | 1040 * 100 mm | |||
| Size of Machine | 1250 x 500 mm Height will vary depends upon the blowroom layout | |||
| No of Ejection Value | 26 Nos | |||
| Ejection Waste % | Below 0.3 % – 0.5 % Maximum 30 Ejection / Min | |||
| Sensitivity setting | On Area, Vertical, Horizontal Sizes & Size Wise Color selection Settings | |||
| Diagnostics | Camera Sensor, Ejection Valve, Lighting Hours, Intensity and – colour Performance graphs | |||
| Display Features | Comprehensive for Camera Array Sensor | |||
| Tube Light Nos and Wattage | 6 Nos (3*2 – 54 Watts) fluorescent day light | |||
| Control System | Dedicated Embedded controller | |||
| Operator Interface | HMI and Console on Mc | |||
| Power consumption | 1 Kw + Fan | |||
| Power | 415 Volts 3 Phase 50 Hz | |||
| Ejected material Collection | AEMCH – Applied Ejected Material Collection Hanger – Optional | |||
| Booster Fan for Ejected Material | Booster Fan based on Feed Machine Specs | |||
| Ejected Cotton Grams/ Ejection | 0.5 Grams / Ejection after Fine Cleaner 0.9 Grams / Ejection after coarse Cleaner | |||
| Booster Fan for Ejected Material | Booster Fan based on Feed Mc Specs | |||
| Compressed Air Requirements | 3 CFM based on 40 Ejection/Min @ 6.5 Bar | |||
UA-146199857-2