FIBRESCAN CRYSTAL

Fibrescan is a simple and reliable system for removal of foreign fibre and white PP contaminants in cotton Blowroom lines.

Fibrescan Crystal is a Multi Camera Sensor based technology working on the principle of monochromatic light intensity variation.Multiple miniature camera sensors interlaced with advanced DIPT (Digital Image Processing Technology), PMAC (Pixel Mapping Across Camera Sensors) and PABE (Pilot Air Boosted Ejector) are at the core of Fibrescan. DIPT, PMAC and PABE together enhance the effectiveness of the equipment and provide the best efficiency among this technology machines.

Features

Multi Camera Sensor one for every 65mm of duct width.
DIPT – Digital image Processing Technology for optimum detection of Contaminants
PMAC – Pixel Mapping Across Camera Sensors
Very low clean cotton ejections typically 0.5% for 50 Ejections / Minute.
Hybrid Embedded Controller enhancesreliability.
Easy to Clean and Maintain, No PC Needed.

Technical Specifications

Description	FibreScan Crystal
Sensing Technology	Multiple Tech with Daylight Camera Array Sensing & UV Spectral Imaging
Processing	Embedded Controller with DIPT – Digital Image Processing Technology PMAC – Pixel Mapping Across Camera Sensor Array PABE – Pilot Air Booster Ejector
Type and No of Cameras	Multiple Camera Array Sensors – 64 Nos MonoChrome Daylight Camera Array Sensor UV Spectral Imaging Camera Array Sensor
Resolution	2048 * 1 with 128 Pixels for Each Camera
Camera Scanning Speed (LPS)	upto 12000 LPS for Camera Sensor Array
White PP Detection	UV Spectral Imaging
Ejection Solenoid	Ultra Quick PABE Ejector with sub 7Ms Response for both ON – OFF
Production Capacity	800 Kgs/Hour-1000 kgs
Throughput Duct size	1040 * 100 mm
Size of Machine	2670 x 1350 x 1000 mm
No of Ejection Valve	26 Nos
Ejection Waste %	Below 0.5% – 1% Maximum 50 Ejections / Min
Sensitivity Setting	On Area, Vertical and Horizontal Sizes & size wise color selection Settings
Diagnostics	Camera Sensor, Ejection Valve & Lighting Hours,Intensity and Performance graphs
Display Features	Comprehensive for both Camera Array Sensor & UV Camera Array Sensor
Tube Light Nos and Wattage	6 Nos ( 3* 2 – 54 watts ) Day light & 12 Nos (6*2 – 36 watts ) UV light
Control System	Dedicated Embedded Controller for Camera Array Sensor , UV Spectral Img
Operator Interface	HMI on Mc
Power Consumption	2 Kw + Fan
Power	415 Volts 3 Phase 50 Hz
Ejected Material Collection	EMCH – Ejected Material Collection Hanger – Optional
Booster Fan for Ejected Material	Booster Fan based on Feed Mc Specs
Ejected Cotton Grams / Ejection	0.5 Grams / Ejection after Fine Cleaner 0.9 Grams / Ejection after Coarse Cleaner
Compressed Air Requirements	3 – 4 CFM based on 40 Ejections / Min @ 6.5 Bar