FIBRESCAN SAPPHIRE UV

Fibrescan is a simple and reliable system for removal of white PP contaminants in cotton Blowroom lines.

Multiple miniature camera array sensors interlaced with advanced technology are at the core of FibreScan.

  • DIPT (Digital Image Processing Technology)
  • PMAC (Pixel Mapping Across Camera sensors )
DIPT, PMAC in combination enhance the effectiveness
of the equipment and provide the best efficiency among this
technology machines in the world.

Features

  • Multi-Camera sensors one for every 65 mm of duct width.
  • DIPT – Digital Image Processing Technology for optimum detection of contaminants
  • Very low clean cotton ejections typically 0.3% for 30 ejections / min
  • Hybrid Embedded controller enhances reliability
  • Easy to clean and maintain, No PC Needed
Fibrescan Sapphire UV is for removal of white PP contaminants
Fibrescan is a simple and reliable system for removal of white PP contaminants

Technical Specifications 

DescriptionFibreScan Sapphire
Sensing TechnologyUV spectral imaging
ProcessingEmbedded Controller with
DIPT – Digital Image Processing Technology
PMAC – Pixel Mapping Across Camera Sensor Array
Type and No of Cameras32 Nos Uv spectral imaging camera array sensor
Resolution2048 * 1 with  128 Pixels for  Each Camera
Camera Scanning Speed (LPS)upto 12000 LPS for Camera Sensor Array
Production Capacity800 Kgs /Hour
Throughput Duct size1040 * 100 mm
Size of Machine1250 x 500 mm Height will vary depends upon the
blowroom layout
No of Ejection Value26 Nos
Ejection Waste %                           Below 0.3 % – 0.5 % Maximum 30 Ejection / Min
Sensitivity setting                          On Area, Vertical, Horizontal Sizes & Size Wise Color selection Settings                                     
Diagnostics                                                                            Camera Sensor, Ejection Valve, Lighting Hours, Intensity and – colour Performance graphs
Display FeaturesComprehensive for Camera Array Sensor
Tube Light Nos and Wattage8 Nos (4*2 – 36 Watts) UV light
Control System                         Dedicated Embedded controller for UV Spectral Img
Operator InterfaceHMI and Console on Mc
Power consumption1 Kw + Fan
Power415 Volts 3 Phase 50 Hz
Ejected material CollectionAEMCH – Applied Ejected Material Collection Hanger – Optional
Booster Fan for Ejected MaterialBooster Fan based on Feed Machine Specs
Ejected Cotton Grams/ Ejection0.5 Grams / Ejection after Fine Cleaner
0.9 Grams / Ejection after coarse Cleaner
Booster Fan for Ejected MaterialBooster Fan based on Feed Mc Specs
Compressed Air Requirements3 CFM based on 40 Ejection/Min @ 6.5 Bar
  
UA-146199857-2