Fibrescan is a simple and reliable system for removal of white PP contaminants in cotton Blowroom lines. Multiple Miniature Camera Array Sensors interlaced with advanced technology are at the core of FibreScan
DIPT, PMAC in combination enhance the effectiveness of the equipment and provide the best efficiency among this technology machines in the world.
Multi-camera sensors, one for every 60 mm of duct width
DIPT (Digital Image Processing Technology) for optimum contaminant detection
Very low clean-cotton ejection, typically 0.5% at 50 ejections per minute
Hybrid embedded controller for enhanced reliability
Easy to clean and maintain; no PC required
Higher efficiency compared to other technology machines.
Multi-camera sensors, one for every 60 mm of duct width
DIPT (Digital Image Processing Technology) for optimum contaminant detection
Very low clean-cotton ejection, typically 0.5% at 50 ejections per minute
Hybrid embedded controller for enhanced reliability
Easy to clean and maintain; no PC required
Higher efficiency compared to other technology machines.
| Description | FibreScan Aquamarine – BUV | |||
| Sensing Technology | UV Spectral Imaging | |||
| Processing |
Based Real – Time Image Processing Technology DIPT – Digital Image Processing Technology PMAC – Pixel Mapping Across Camera Sensor Array |
|||
| Type and No of Cameras | Multiple Camera Array Sensor 32 Nos | |||
| Resolution | 2048 Pixels (16*128) for Camera Array | |||
| Camera scanning speed (LPS) | Upto 12000 LPS for Cameras | |||
| Production Capacity | Upto 1000 Kgs /Hour | |||
| Throughput Duct size | 960*100mm | |||
| Size of Machine | 600 mm L x 1250 mm W x 2250 mm H will vary depends upon the blowroom layout | |||
| No of Ejection Value | 48 Nos | |||
| Ejection Waste % | 0.5 % for Maximum 50 Ejection / Min | |||
| Sensitivity setting | On Area, Vertical, Horizontal Sizes & Size Wise Settings | |||
| Diagnostics | Array Sensor Camera, Ejection Valve, Lighting Hours, Intensity graphs | |||
| Display Features | Comprehensive for Array Sensor Camera | |||
| Tube Light Nos and Wattage | 10 Nos(5*2 – 36w Watts) B/UV light | |||
| Control System | Dedicated Embedded controller for Array Sensor Camera | |||
| Operator Interface | HMI and Console on Mc | |||
| Power consumption | 1 Kw + Fan | |||
| Power | 415 Volts 3 Phase 50 Hz | |||
| Ejected material Collection | AEMCH – Applied Ejected Material Collection Hanger – Optional | |||
| Booster Fan for Ejected Material | Booster Fan based on Feed Machine Specs | |||
| Ejected Cotton Grams / Ejection | Around 0.7 Grams / Ejection after Fine Cleaner | |||
| Compressed Air Requirements | Below 2 CFM based on 50 Ejection/Min @ 6.5 Bar | |||