Fibrescan  is a simple and reliable system for removal of white PP contaminants in cotton Blowroom lines. Multiple miniature camera array sensors  interlaced with advanced technology are at the core of fibrescan  

  • DIPT (Digital Image Processing Technology)
  • PMAC (Pixel Mapping Across Camera sensors )
DIPT, PMAC in combination enhance the  effectiveness of the equipment and provide the best efficiency among this technology machines in the world.  


  • Multi-Camera sensors one for every 65 mm of duct width.
  • DIPT – Digital Image Processing Technology for optimum detection of contaminants 
  • Very low clean cotton ejections typically 0.3% for 30 ejections / min 
  • Hybrid Embedded controller enhances reliability 
  • Easy to clean and maintain, No PC Needed 

Technical Specifications 

DescriptionFibreScan Sapphire
Sensing Technology

UV Spectral Imaging and U – Sonic for Reflective Transmitance detection

ProcessingEmbedded Controller with
DIPT  –  Digital Image Processing Technology
PMAC –  Pixel Mapping Across Camera Sensor Array
PABE  –  Pilot Air Booster Ejector
Type and No of Cameras32 Nos.
UV Spectral Imaging Camera Array Sensor
Resolution2048 * 1 with  128 Pixels for  Each Camera
Camera Scanning Speed (LPS)12000 LPS 
White PP DetectionUV 
Ejection Solenoid26 Nos
Production Capacity800 Kgs/Hour
Throughput Duct size1040 * 100 mm
Size of Machine1350 x 1000 mm x Height will vary depends upon the blowroom layout 
Ejection Waste %Below 0.3% – 0.5% Maximum 30 Ejections / Min
Sensitivity SettingOn Area, Vertical and Horizontal Sizes & size wise color selection Settings
DiagnosticsCamera Sensor, Ejection Valve & Lighting Hours
Display FeaturesMin, Hour, Daily and monthly Ejection Graphs 
Tube Light Nos and Wattage8 Nos ( 4* 2 – 36 watts ) UV light
Control SystemDedicated  Embedded Controller for Camera Array Sensor , UV Spectral Img
Operator InterfaceHMI and Console on Mc and also web Interface on remote PC 
Power Consumption1 Kw + Fan
Power415 Volts 3 Phase 50 Hz
Ejected Material CollectionEMCH – Ejected Material Collection Hanger – Optional
Booster Fan for Ejected MaterialBooster Fan based on Feed Mc Specs
Ejected Cotton Grams / Ejection0.5 Grams / Ejection after Fine Cleaner
0.9 Grams / Ejection after Coarse Cleaner
Compressed Air Requirements2 CFM based on 30 Ejections / Min @ 6 Bar